Tel:0161 330 7631 Email: enquiries@hanlonandwright.co.uk
17
Nov

Off loading of 2nd new production line.

Here we have H&W engineers off loading a 2nd new production line at a Manufacturing Company in Cheshire, the Line was off loaded by crane and skated into the build, prior to H&W engineers positioning and building the line up.
07
Nov

H&W engineers recently off loaded this manufacturing line from incoming transport using one of our 7 ton fork lift trucks, we then positioned the line, built u, lined leveled and connected the services.
30
Oct

Off loading of new manufacturing line in Cheshire.

Here we have H&W engineers off loading a brand new manufacturing line in Cheshire. We used one of our 7 tonne fork lift trucks to unload the vehicle and position within the building, prior to installation.
27
Oct

4m wide container, Dukinfield to Stoke.

Here we have our unit mounted Hiab type crane. We loaded a 10m x 4m wide container at our premises in Greater Manchester, delivered the container to premises in Stoke on Trent. Due to the container being 4m wide we had to notify the Police of the route we had to take.
15
Oct

Vessel, Shropshire to Wigan.

H&W carried out the removal of Vessel from Shropshire to Wigan. At Shropshire our engineers removed all the access ladders, etc, the vessel was then up lifted using a 60 tonne crane, lay over and lowered onto the rear of one of our low loader trailers. Prior to moving the...
14
Oct

Re-location of wall paper manufacturing machinery in Cheshire.

Recently H&W engineers dis-connected all the services on the machinery and oven at a wallpaper manufacturing Company in Cheshire, we skated the machinery through the factory to outside then loaded onto one of our rigid vehicles using one of our 6 tonne fork lift trucks,...
12
Oct

Press Brake Machine, Midlands to Lancashire.

H&W recently Disconnected the services and un-bolted this 9 ton Press Brake at a Company in the Midlands. We skated the machine to the doorway, and loaded it to our transport using one of our rear mounted hiab type cranes. Once delivered to a manufacturing Company in...
10
Oct

Re-siting of Mixer.

Here we have a Mixer that H&W engineers re-sited at a paint manufacturing Company in the North West of England. The Mixer was un-bolted from the floor and lay over using two of our 5 tonne fork lift trucks, traversed through the factory and into position, we secured the...
08
Oct

Working with the NHS.

Here we have one of our group of H&W engineers working with the NHS at an International Acclaimed Hospital in Yorkshire.
07
Oct

Installation of Cyclones.

H&W engineers recently carried out the installation of 2 x Cyclones at a Food Plant in Mid Wales. The Cyclones were off loaded from transport and craned into position using a 160 ton mobile crane. Once in position our engineers secured the Cyclones to steel work within the...